Tim TrottTim TrottNothing is impossible

Introduction to Photo Editing

By , Saturday 12th March 2016 in Graphic Design

Photo editing, or manipulation, allows designers and photographers to improve photos in countless ways. This can be as simple as cropping and rotating, or complex such as creating composite images.

These are some basic tips to help enhance your photographs; the next tutorials will cover composite images where more than one image is used to create a final design.

This tutorial is based around Adobe Photoshop, but the techniques can be adapted to most photo editing suites.

Crop and Rotate

The first steps are usually to straighten and crop photos. This can make a huge difference strait away to photographs. Cropping photos in Photoshop is done by using the crop tool in the toolbar. From the tool options bar you can select the various options, including aspect ratio and preselecting ratios for print, landscape or portrait. Photoshop then places the crop grid over the image. You can drag and resize by using the corner grabbers. There is a grid which divided the tool overlay into 9 equal segments. This grid is called the rule of thirds. It is best to place key elements in the photo along these lines. The rule of thirds is covered in more detail in my photography composition article in the link.

As with most tools, you can hold the shift key when dragging the corners. This will constrain the proportions of the image and preserve the original aspect ratio.

Photoshop Crop Tool
Photoshop Crop Tool

The second step is to rotate the image. This is especially important for landscapes where there is a definite horizon. To straighten the image you can use the free transform tool from the Edit menu, or Ctrl+T. This allows you to drag the corners of the image to rotate.

Brightness/Contrast and Shadows/Highlight

You many need to adjust the brightness and contrast of the image, in case the photo was under or over exposed, or if you just want it lighter or darker. This can be done from the Image > Adjustments menu, but also adjustment layers. If using the menu tools, there are a number of options available. Each of which have different effects on the image. Generally they have sliders to adjust the values and you can preview the changes before applying them. Feel free to have a play with the different settings here; some of them can create some quite unique effects.

Adjusting Brightness and Contrast to Enhance Image
Adjusting Brightness and Contrast to Enhance Image

The usual effects are adjusting the brightness and contrast and also changing the shadows and highlights. Brightness and contrast makes the image brighter or darker, and also effects how black the blacks are. Shadows and highlights is similar but you have a greater control over how black the blacks are but also how white the whites and all the tones in between. These tools can really enhance landscapes, especially skies.


Moving on to some more advanced tools, we can use the spot healing tool, healing brush and the patch tool to correct any defects, such as dust marks or scratches, or to even remove elements from a photo all together. The spot healing tool allows you to "paint" over the defect and Photoshop will automatically sample the area around it and automatically "fix" the defect. The healing brush tool allows you to specify where the replacement data will come from, sample the data and merge to remove the defect. The clone stamp basically allows you to select a region in the image, and copy that, in airbrush form, over another part on the image. You can also use the patch tool, which allows you to patch over a region in the image. It allows you to draw around a defect and drag another part of the image on top. Photoshop will then sample and merge the two to remove the defect. The secret to doing this properly is to not use too big a brush, and take your time. If you rush, Photoshop may start to include the very things that you want to remove.

Photoshop Healing and Patch Tool
Photoshop Healing and Patch Tool

In my example image blow from Skye in Scotland, there are some unsightly pylons and wires in the photo. The following screen grabs show the various tools removing the unsightly distractions.

Photoshop Spot Healing
Photoshop Spot Healing
The spot healing tool is a good quick fix, but as you can see for large areas you can still just about make out where the tool has computed the sky. There is a barely visible line and slightly blurred outline. You can reduce this by reducing the brush size, and also doing smaller sections, one at a time.

Photoshop Healing Brush Tool
Photoshop Healing Brush Tool
The healing brush tool results in a much higher quality repair. To use the tool you must first specify where the replacement data is. This is done by using the ALT key and clicking on a similar area of the image. As long as the tool is used, data from around this point will be used.

The patch tool allows you to define a selection with a lasso tool, then drag an existing area of the image into this area which will then be merged in.

Finished Removing Pylon and Wires
Finished Removing Pylon and Wires

High Pass Filter

Another useful tool is the high pass filter. This is available from Filters > Other > High Pass Filter. To use this filter, you need to create a duplicate of the photo and apply the filter to it. It will then create a very grey image, with some of the details highlighted. You then need to go into the blending options on the layers panel for the filtered layer and select Hard Light. This will really enhance the details, especially in things like grass, stone and walls. Sometimes the effect will be too strong, but you can adjust this by changing the opacity of the layer.

You can see the effects in the example below, left being the original, right having the high pass filter applied.

High Pass Filter
High Pass Filter

Saving Images

I would say that it is essential to save your modified image as a copy of the original. Never overwrite or save over the original because there is no way to get the original back later on. If you have lots of layers and adjustments it's best to save as a PSD file, since the other formats will lose all this extra information. Additionally, saving as a JEPG will lose some detail in the image since the image is compressed and during this compression the quality will be reduced.

To recap - keep the original safe, do not save over it. Save as PSD to preserve layers and keep adjustments for later changes. Save as JPEG only for distribution - sending email, upload to web and so on.

My website and its content are free to use without the clutter of adverts, tracking cookies, marketing messages or anything else like that. If you enjoyed reading this article, or it helped you in some way, all I ask in return is you leave a comment below or share this page with your friends. Thank you.

About the Author

Tim Trott

Tim is a professional software engineer, designer, photographer and astronomer from the United Kingdom. You can follow him on Twitter to get the latest updates.

Further Reading
One thought on “Introduction to Photo Editing”
  1. Gravatar
    Danisa Rais

    Thank you for publishing such a nice tutorial. Though cropping or rotating is not so hard, but still difficult for beginners.Many thanks for sharing.

Leave a Reply

Your email address will not be published.