Flash photography isn't just a back-up for shooting in low-light conditions; correct use of flash can improve photos even if they are taken in broad daylight. This guide shows you how to use a built in flash as well as hot shoe, off axis and macro flash guns.
Flash photography may seem a little daunting at first, there is a lot of equipment and accessories out there. Maybe you've tried using a built in flash and had poor results and want to get better photos in low light situations, or you want to experiment and get creative. This flash photography guide will show you the different types of flash, the settings to use and some techniques for getting the most out of your flash.
This guide was written using Canon equipment, however all flashes function in the same way and have very similar terminology.
Simply put, a flash gun is a way of creating a flash of light at the exact time as the camera shutter is open. To create a photograph, the camera needs light and the most basic usage of the flash is to provide more light. In low light scenes the flash illuminates the subject with a brilliant light which is more than enough to capture an image. Without flash you would need very long exposure settings, which are often impractical.
Flash guns can also be used to enhance scenes which would normally photograph well, but there may be undesirable shadow or the lighting can be improved. Examples of this are photography in direct sun light. The sun creates very harsh shadows, and careful use of the flash can "fill in" the shadows creating a smooth even light. Flash can also be used to add extra highlights to a scene.
Finally, flash allows you to get creative. You can not only illuminate your subject but by using filters change the colour of the light, or use objects or screens to create shadow or masks. Certain flash modes which we'll cover later allow you to capture dynamic movement with great results. We'll cover this in more detail later, first let's look at the types of flash available.
There are many different types of flashgun available; each one has its advantages and disadvantages.
The standard built in flash is the one you are probably most familiar with. The flash is typically small and low powered, or even an LED in the case of smartphones. More advanced cameras feature a popup flash. This not only increases the coverage it also helps reduce red eye (see below). Standard flashes are OK for most people and in close proximity they work well. They are however usually very limited in control and are under powered, meaning they do not have a very good range.
External "hot shoe" flash is the first upgrade from the standard flash. They come in many different sizes and power options and use their own batteries, extending the life of your precious camera battery. External flashes offer a much greater control over the flash and even have different modes, similar to the camera for different effects. We'll cover these later. External flashes are more bulky to transport and add to the overall weight of your camera. Not all cameras support external flashes so check with your manual to see what is supported.
Macro flashes often offer similar functionality to that of the external hot show flash, however they typically attach to the front of the lens instead of the camera body. This is because at the close macro distances the lens would obstruct the flash and cast a shadow onto the subject.
Macro flash rings are also good for portrait photography as they not only create a softer light, but the ring shape looks much more aesthetically pleasing when reflected in a models eyes.
The studio flash is the granddaddy of all flashes. They are very large and require their own tripod and mains power supply. They also cost a small fortune, however in a studio setting they allow precise control over lighting. They can have enormous range and can be used for everything from individual portraits through to commercial vehicles and interior shots.
Depending on the types of flash used, not all settings will be available, or you may have additional settings. These are the most common settings found on the average flash units.
Auto Mode - As suggests this setting places the flash into automatic mode and it will attempt to adjust settings to match what it things is correct for the scene.
Red Eye Reduction - Red Eye occurs when the flash bounces off the back of a person (or animals) retina. In dark situations when the flash is most likely to be used, the iris is opened wide to allow light in. This maximises the amount of light let into the eye, but also the reflected back from the retina. Red Eye reduction works by firing the flash twice - once before the shot and again during the shot. The first "pre-flash" tricks the iris into closing, thereby reducing the visible part of the retina.
Fill-in Flash - Also known as flash on or forced flash, this setting forces the flash to fire every time, even if there is enough available light to take the picture without flash. This mode is used to "fill in" shadows when taking photos in direct sunlight, or to add details and highlights to a photo.
High Speed Sync - Flashes normally work at between 1/60 and 1/200 shutter speeds. Exposure is mainly controlled by the flash itself. Sometimes however you may want to use a faster shutter speed, but unless your camera and flash support high speed sync, you'll end up with dark bands across the photo. This is caused due to the flash duration illuminating when the shutter is opening and closing. The shadow is actually the shutter not fully opened.
Exposure Compensation - Allows you to manually control the amount of flash cast over your subject without changing the camera's aperture or shutter speed.
Exposure Bracketing - Similar to auto exposure bracketing, this setting takes multiple shots with slightly different exposures, usually -1/0/+1 stops.
Front and Rear curtain sync - Important for capturing motion in an image. Normally the flash will trigger when the shutter is fully open. With slow shutter speeds there is a delay between the shutter opening and the shutter closing (curtains). Within this delay we can choose when to fire the flash. Front sync fires the flash as the shutter is opened, while rear fires when the shutter closes. If there is motion in the photo - in this example a runner, if we use the front curtain sync the flash fires and the shutter remains open as the subject blurs away from the flash. In rear sync, there is a blur up to the flash.
If you've taken photos indoors you will probably know that the flash is very harsh and can make the image flat, or washed out. This can be improved by using a diffuser or "bouncing" the flash. By this I don't mean dropping it! Flash diffusers come in all shapes and sizes for all budgets. Here are the most common.
The cheapest is a piece of paper sellotaped over the flash. I've used this technique many times with great effect and it works well for popup flashes where you cannot buy diffusers. Be careful not to allow the paper to touch the flash, as the heat produced can be quite intense. Not only can you potentially set fire to the paper, but also it will damage your flash.
Another type is the push on or clip over for external flash. These push onto the flash head and are quite easy to clip on and off. They are also quite cheap and sold by most camera shops.
For a little more money, a soft box extender provides a nice soft flash ideal for portraits. You can get different sizes and colours to control the light.
The umbrella diffuser is used with studio flashes or strobes which can be very harsh. They are positioned so that the flash fires into the umbrella and then bounce out onto the subject with a lovely soft light.
Bouncing a flash is a technique for external and studio flash. It involves directing the flash head towards the ceiling or wall where it is then diffused back down onto the subject. Varying the angle can create different effects and you can adjust how diffused or harsh the light is.
One of the main advantages of a hot shoe external flash it the ability to use it off the camera body. Using a wireless trigger or sync cable, you can position the flash anywhere around your subject - even from behind. This can be used to create lots of different lighting effects such as a back light or side light, and has the most options for creativity.
In the examples below from my photoshoot with Nina, an off axis flash was used with a red filter positioned behind her to illuminate the back drop, while a second flash highlights her shoulder and hair. In the other photos the off axis flash was positioned to highlight her hair blowing in the wind, and positioned in front of her, and to the side of the camera, to cast shadow on the concrete.
As discussed before, the macro ring flash is the same as a hot shoe flash with the exception that it is attached to the front of a macro lens. This prevents the lens getting in the way of the flash at very close distances. Macro ring flashes can usually only be attached to specific lenses that support the ring flash mount, although you may be able to get an adapter which screws into the filter ring.
Ring flashes are also good for portrait photography as the light produced is usually soft and the ring creates a pleasing halo shape in the eyes of your model. The angle between the flash and subject is also near zero so there are little shadows created.
Studio flashes are the big brothers to off axis flash, but much larger and much more powerful. They usually are powered directly from the mains or large batteries. They are not portable and require their own tripods. The level of control and versatility of a good studio flash (or strobe light) is unprecedented. Often multiple strobes are combined; sometimes with off axis flash guns to gain complete control over the lighting.
My website and its content are free to use without the clutter of adverts, tracking cookies, marketing messages or anything else like that. If you enjoyed reading this article, or it helped you in some way, all I ask in return is you leave a comment below or share this page with your friends. Thank you.