Tim TrottTim TrottWelcome to my site!

DIY Flash Softbox

By , Saturday 30th April 2016 in Tutorials

Flash softbox are devices placed over a flash gun to soften the harshness of a flash burst. The act as diffusers spreading the light out and reducing the harshness of shadows.

This is a collection of a few DIY flash softbox ideas for built in flash photography and external flashes.

Paper flash softbox for built in flashes

DIY Flash Diffuser
DIY Flash Diffuser
The cheapest softbox is a piece of paper sellotaped over the flash. I've used this technique many times with great effect and it works well for popup flashes where you cannot buy diffusers. Be careful not to allow the paper to touch the flash, as the heat produced can be quite intense. Not only can you potentially set fire to the paper, but also it will damage your flash. Variations on this design can be used for all kinds of flashes.

 

Milk Bottle Diffuser

A cheap alternative to purchasing a diffuser for an external flash gun is to use the bottom of a plastic milk bottle. Just cut it down to size and tape it into place. The results are not as good as a purchased diffuser, but for the price and a little color correction, the results are perfectly acceptable.

 

DIY Flash Softbox Diffuser

It's quite easy to make your own flash softbox diffuser out of an old cardboard box, paper and sticky tape.

DIY Flash Softbox
DIY Flash Softbox
Start off by selecting a suitable sized box. It should be roughly square and be large enough to create a softbox but not so large the flash will be lost. Lay down the flash next to the box and mark out on the box where the flash will be located.
DIY Flash Softbox
DIY Flash Softbox
Cut out the markings which will narrow the opening and will hold the flash.
DIY Flash Softbox
DIY Flash Softbox

DIY Flash Softbox
DIY Flash Softbox
Cut a sheet of plain white paper about 1cm larger in circumference than the area of the softbox opening and make a slit diagonally inwards from the corners. The paper should then fit over the opening and be taped securely to the outside of the softbox.
DIY Flash Softbox
DIY Flash Softbox
The softbox can now be fitted over the flash head and used. Because the flash is now diffused, you may need to adjust exposure compensation to regain correct exposure.

My website and its content are free to use without the clutter of adverts, tracking cookies, marketing messages or anything else like that. If you enjoyed reading this article, or it helped you in some way, all I ask in return is you leave a comment below or share this page with your friends. Thank you.

About the Author

Tim Trott

Tim is a professional software engineer, designer, photographer and astronomer from the United Kingdom. You can follow him on Twitter to get the latest updates.

Further Reading
Leave a Reply

Your email address will not be published.